How To Fix Bent CPU Pins

Bent CPU pins aren’t the end of the world. With enough patience and a little luck, you can straighten them out, and the CPU will work properly again. CPUs are delicate, and it’s essential to use care and precision as you set to work straightening the pins. 

Will Bent CPU Pins Affect My Computer?

You can’t use a CPU that has bent pins. You must straighten the pins before installing the CPU onto the motherboard. If the computer works – and that’s unlikely if there’s any significant bending – you’re still going to be looking at errors in your computer’s operation. All the parts need to be installed and lined up correctly. 

People have reported success when using a CPU with a few bent pins, but it’s better to try to fix them than to hope for similar luck. 

While it might be better to return a CPU under warranty if the pins are bent, that isn’t always possible. If you can’t swap it out for a new one, try to straighten the pins back into position. 

How to Tell if CPU Pins are Bent

You should be able to tell if they’re bent by looking at it. Each pin in the CPU should be perfectly straight and aligned if it isn’t damaged.

Try looking at the CPU from different angles or using a magnifying glass if you’re having trouble telling whether the pins are bent. Since the CPU and the pins are so small, having a mounted magnifying glass could help you identify and fix bent pins.

Checking cpu bent pins with a magnifying glass

Holding the CPU up to your eye level and then looking straight down the rows might help determine whether some pins aren’t standing straight. 

How to Avoid Bending CPU Pins

Always work with caution when holding your CPU. Don’t store it under anything heavy, and don’t use other tools over it. Something as simple as a dropped screwdriver could bend the pins.

Be careful when working with the CPU and motherboard. If you’re removing it, lift it straight up with two fingers and set it down somewhere without the pins touching anything. 

How to Fix Bent CPU Pins

People use tweezers, credit cards, mechanical pencils, and sewing needles to maneuver CPU pins back into place.

Credit Card and Razor Blade

With this method, you can use a credit card or a razor blade to fix bent pins. Razor blades are a little more dangerous but have a slimmer base, which might help them fit between the rows. It all depends on what’s available and what works best for you. 

  1. Set the CPU on a flat and stable surface.
  2. Run the edge of the credit card or razor blade down a row of pins as if it were walking down the sidewalk between houses.Using razor blade to straighten cpu pins
  3. Use firm but steady pressure to guide it down each row horizontally. You may feel bent pins pushing against it. You can gently pull it to the left and right to help straighten the pins.
  4. Guide it down the vertical rows of pins to align them properly in the other direction as well.
  5. Look at the CPU closely to spot any pins that aren’t in the proper shape. Try to work on nudging them back into place until they’re all positioned correctly.

There are many rows of pins on a CPU, so this process can take a while. Give yourself time, and don’t try to rush. A steady hand will increase your chances of success. 

Mechanical pencil

When you use a mechanical pencil to fix bent pins, you’re looking to straighten out individual pins one at a time. Always remove any lead from the pencil before beginning.

  1. Place the CPU on a flat and stable surface. If you have something to hold it steady so you can use your hands easily, that would be best.
  2. Place the empty head of the pencil around a pin.Use mechanical pen to fix bent pins
  3. Use steady, slow pressure to pull it into position. It might take a little time, but going slow is better than breaking off a pin.

When you’re done, you can try to use the trick of running a credit card or razor blade between rows to see whether the progress is smooth. 


If you’re going to use tweezers to grasp and guide the CPU pin back into place, look for tiny tweezers. They also need to be anti-static and non-magnetic. 

Use twezzers to straighten pins

Sewing needle

You want to choose a tiny sewing needle. It should be slim enough to fit between the pins so that you can use it to bend a pin back into the proper place.

  1. Place the CPU on a flat and stable surface. It must stay still for this method to work.
  2. Slide the needle on the side of the pin in the direction it’s bent.
  3. Pull back on the needle to maneuver the pin into place. 

Don’t use so much pressure that the pin snaps. This, again, is where going slow and taking your time matters. 

Precautions and Tips

These precautions apply to fixing bent CPU pins, no matter what method you use.

  1. Always avoid making contact with the surface of the CPU as much as possible. Even if you’re using a razor blade or credit card to straighten by navigating down rows of pins, your focus should be on making contact with the pins themselves and not with the surface of the CPU.
  2. Take care not to let the pins come in contact with one another. 
  3. Don’t ever force anything that doesn’t feel like it wants to move. For example, if the distance between the pins is too small for your credit card, find another thin object to use in the same way. It’s better to have to take the time to find another device than to break your CPU.
  4. If you’re having trouble getting a pin to move with you using sewing needles, try using two. Just place one on either side of the pin and use them together to move it into position.
  5. Metal is more pliable when it’s warm. Make sure to perform this operation in a warmer room rather than a cooler one. Some people have used hair dryers to warm up their CPUs before adjusting the pins, but of course, that could damage the CPU. Always use caution.  
  6. Don’t keep bending and rebending the pins. They only have so much mobility in them before they break. 
  7. Some people reported having issues with the CPU cooler being installed too tight after fixing bent pins. Check the screws and make sure it’s firm but not overly tight. It’s possible that the issues you’re experiencing aren’t from the bent pins but instead from the CPU cooler. 
  8. Remember that static can kill a CPU. Look for an antistatic wristband and mat to use when working on your CPU. Tools like tweezers made for computers are also a good option. 

Frequently Asked Questions

Can I Use My CPU if a Pin Is Broken?

A broken pin generally means your CPU isn’t going to work anymore. Some people have had luck trying to use it in various ways, but it’s difficult to recommend any of them. You could damage your motherboard or have a piece break off that’s difficult to remove from other components. 

Overall, if a pin breaks, you should look for a new CPU. 

Do All CPUs Have Pins?

In general, AMD CPUs have pins on the CPU. Intel has pins on the motherboard and not on the CPU. This is one of several reasons why they require different motherboards; they aren’t physically compatible.

What Are Signs of Bent Pins in a Computer?

Bent pins can cause all kinds of problems, even if the computer POSTs. For example, you might notice a lower clock speed, issues with your RAM, or slots in the motherboard that don’t function properly. The error might not appear to be related to bent pins at first. 

Will Bent Pins on the Motherboard Affect My Computer?

If bent pins are on the motherboard, you are much more likely to have your computer fail or have errors. Both pieces should have straight and even pins. 

If I Get the Pins Straight, Will My CPU Work Again?

It might. It just depends on what kind of damage was done. CPUs are delicate and can have unseen damage. 

Will Bending My CPU Pins Void My Warranty?

You shouldn’t try to bend your CPU pins if it’s still under warranty. Reach out to support and ask whether your warranty covers bent pins before you begin. Any additional damage has a chance to void your warranty. 

Add a Comment

Your email address will not be published. Required fields are marked *